MAX6865UK40D2S+T Overview

Power management is mounted through 5 terminals. There is a Tape & Reel (TR)-packaging method applied to IC management. In this PMIC, you can find 1 functions for your reference. Depending on the power managment ic you are looking at, you can find a total of 1 channels. Please refer to power management for SC-74A, SOT-753 functions. Compared to other Simple Reset/Power-On Reset products, this PMIC has a lot of benefits to offer. Specifies a reflow peak temperature of 260 for the package during reflow. In a 2.5V supply voltage, the power management conducts. Power management conducts at a voltage of 1. Power management is included in the Surface Mount mount. There is a subcategory of this power ic known as Power Management Circuits. There are a total of 5 pins on power management. Power managment ic pin count is 5. Normally, the supply voltage (Vsup) for this PMIC should not be lower than 1.1V. In this PMIC, the maximum supply voltage (Vsup) should not exceed 5.5V volts. Surface Mount is the recommended mounting type. This power management is the recommended temperature range for the supervisors: -40°C~85°C TA. During operation, this power management system outputs Push-Pull, Totem Pole. It is estimated that the voltage supervisor's supply current is 7μA. A similar IC managements number of the manufacturer can always be found by using MAX6865, the base power ics number.

MAX6865UK40D2S+T Features

Simple Reset/Power-On Reset type
Minimum supply voltage of 1.1V
7μA operating supply current

MAX6865UK40D2S+T Applications

There are a lot of Maxim Integrated MAX6865UK40D2S+T Voltage Supervisors applications.

• Detection of phase imbalance
• Power communication system
• Electronics installed in the vehicle
• Multi-voltage system
• Precision measurement
• Household appliances
• Kitchen appliances
• Medical-specific isolation transformer
• Linux and server computing
• Important electronics for automotive protection