MAX6865UK40D5S+T Overview
As you can see, this power management is mounted through 5 terminals. There is a Tape & Reel (TR)-packaging method applied to IC management. In this PMIC, you can find 1 functions for your reference. On this supervisor, there is a series of 1 channels that can be found. In this PMIC, you can find SC-74A, SOT-753 functions for your reference. As with other Simple Reset/Power-On Reset products, this IC management also offers a wide range of benefits. According to the specification, the package's peak reflow temperature is specified to be 260. IC management conducts at a voltage of 2.5V. There is a voltage supply of 1 for the PMIC chip, and the chip conducts at that voltage. By Surface Mount, IC management has been mounted. There is a subcategory called Power Management Circuits for this power management. Taking into account all of the pins, this power management has a total of 5. 5 pins make up the power management. Normally, the supply voltage (Vsup) for this PMIC should not be lower than 1.1V. The maximum supply voltage (Vsup) is not to exceed 5.5V volts in this IC management. Power management recommends the Surface Mount mounting type. This range of temperature should be set for the supervisors: -40°C~85°C TA. When this power management system is in operation, it produces an output voltage of Push-Pull, Totem Pole. The supervisor's supply current is specified to 7μA. It is always advisable to use MAX6865, the base supervisor number, when searching for similar PMICs from the manufacturer.
MAX6865UK40D5S+T Features
Simple Reset/Power-On Reset type
Minimum supply voltage of 1.1V
7μA operating supply current
MAX6865UK40D5S+T Applications
There are a lot of Maxim Integrated MAX6865UK40D5S+T Voltage Supervisors applications.
- Urban rail transit weak current power monitoring
- Electronics installed in the vehicle
- Data storage applications
- Telecommunications equipment
- Leakage protection
- Transformer load monitoring equipment
- Dash board
- Rechargeable batteries
- Radio
- Battery cars
