MAX6865UK40D6L+T Overview

There are 5 terminals connected to this power management, which makes it easy to mount. There is a Tape & Reel (TR)-packaging method applied to IC management. Power management is possible to find a series of 1 functions. It is possible to find on this power management a series of 1 channels. Please find attached SC-74A, SOT-753 functions for your reference in this IC power. Several of the benefits of this PMIC are also shared by other Simple Reset/Power-On Reset products. The package peak reflow temperature is specified to be 260. There is a voltage supply of 2.5V for the PMIC chip, and the chip conducts at that voltage. IC management conducts in a 1-voltage supply. By Surface Mount, IC management has been mounted. This power ic can be sub-categorized as Power Management Circuits. In total, it has 5 pins on IC management. 5 pins are present on the power management system. It is recommended that Vsup should not be less than 1.1V for this IC power. The maximum supply voltage (Vsup) is not to exceed 5.5V volts in this IC management. Power management' mounting is recommended to be done with the Surface Mount type of mounting. The temperature of the supervisors should be set to this range: -40°C~85°C TA. Power management has an output of Push-Pull, Totem Pole during operation. The supervisor's supply current is specified to 7μA. It is always advisable to use MAX6865, the base supervisor number, when searching for similar PMICs from the manufacturer.

MAX6865UK40D6L+T Features

Simple Reset/Power-On Reset type
Minimum supply voltage of 1.1V
7μA operating supply current

MAX6865UK40D6L+T Applications

There are a lot of Maxim Integrated MAX6865UK40D6L+T Voltage Supervisors applications.

• Refrigeration
• Automotive permanent magnet synchronous motors
• Microprocessor system
• Display equipment
• Detection of phase sequence
• Efficient information transmission
• Multi-voltage system
• Electronics installed in the vehicle
• Set top box
• Stable power system