MAX6865UK41D2S+T Overview

There are 5 terminals connected to this power management, which makes it easy to mount. It is packaged with Tape & Reel (TR). Power management is possible to find a series of 1 functions. Depending on the power managment ic you are looking at, you can find a total of 1 channels. IC management is packaged as a SC-74A, SOT-753 package. There are a lot of similarities between this IC power and other Simple Reset/Power-On Reset products. During the reflow process, a peak temperature of 260 is specified for the package. During operation, the power ic is supplied with a voltage of 2.5V. When a supply voltage of 1 is applied to the power ic, it conducts. Power management is included in the Surface Mount mount. Power Management Circuits is a subcategory of this PMIC chip. 5 pins are present in total in this power management. Power managment ic pin count is 5. It is recommended that Vsup should not be less than 1.1V for this IC power. The maximum supply voltage (Vsup) in this PMIC should not exceed 5.5V volts. In this case, Surface Mount is the recommended mounting type. The temperature of the supervisors should be set to this range: -40°C~85°C TA. As a result of this supervisor's operation, the output voltage is Push-Pull, Totem Pole. The power management's supply current is 7μA. A similar IC managements number of the manufacturer can always be found by using MAX6865, the base power ics number.

MAX6865UK41D2S+T Features

Simple Reset/Power-On Reset type
Minimum supply voltage of 1.1V
7μA operating supply current

MAX6865UK41D2S+T Applications

There are a lot of Maxim Integrated MAX6865UK41D2S+T Voltage Supervisors applications.

• Efficient information transmission
• Embedded computing
• Electric heating appliances
• Automotive permanent magnet synchronous motors
• Detection of phase sequence
• Stable power system
• Battery cars
• Electronics installed in the vehicle
• Rechargeable batteries
• Household appliances