MAX6865UK41D6L+T Overview

A total of 5 terminals are used to mount this power management. It is packaged with Tape & Reel (TR). As a reference, this IC management includes 1 functions for your convenience. Power management consists of 1 channels, each of which can be used independently. In this PMIC, you can find SC-74A, SOT-753 functions for your reference. There are many benefits that this IC power shares with other Simple Reset/Power-On Reset products as well. In order to ensure a good reflow performance, the package peak reflow temperature must be set at 260. IC management conducts in a 2.5V-voltage supply. A supply voltage of 1 is used to conduct the PMIC chip. Surface Mount mounts power management on the wall. There is a subcategory of this power ic known as Power Management Circuits. There are a total of 5 pins on power management. There are 5 pins on the power managment ic. There should be a minimum voltage supply (Vsup) of 1.1V for this PMIC. The maximum supply voltage (Vsup) in this PMIC should not exceed 5.5V volts. Power management recommends the Surface Mount mounting type. The supervisors should be set to the following temperature: -40°C~85°C TA. There is an output voltage of Push-Pull, Totem Pole from this supervisor when it is operating. There is a 7μA supply current present in the power management. A similar IC managements number of the manufacturer can always be found by using MAX6865, the base power ics number.

MAX6865UK41D6L+T Features

Simple Reset/Power-On Reset type
Minimum supply voltage of 1.1V
7μA operating supply current

MAX6865UK41D6L+T Applications

There are a lot of Maxim Integrated MAX6865UK41D6L+T Voltage Supervisors applications.

• Detection of phase loss
• DVR
• Multi-voltage system
• Microcontroller system
• Smart meter
• Consumer electronics
• Radio
• Power communication system
• Cloud computing
• emergency room