MAX6865UK44D2S+T Overview

There are 5 terminals connected to this power management, which makes it easy to mount. Packaging is in the form of a Tape & Reel (TR). There are 1 functions included in this PMIC so that you can refer to them. There are 1 channels on this power managment ic that can be found in a series. In this IC management you will find SC-74A, SOT-753 functions for you to refer to. This IC power shares lots of benefits with other Simple Reset/Power-On Reset products. IC management is specified that the package peak reflow temperature should be 260. When 2.5V is applied to the power ic, it conducts. Power management conducts at a voltage of 1. By Surface Mount, IC management has been mounted. As a subcategory, this PMIC chip can be categorized as Power Management Circuits. A total of 5 pins are located on this power management. 5 pins make up the power management. Normally, the supply voltage (Vsup) for this PMIC should not be lower than 1.1V. This IC power should be powered by no more than 5.5V volts of supply voltage (Vsup). A Surface Mount mounting type is recommended. This power management is the recommended temperature range for the supervisors: -40°C~85°C TA. While this power management is operating, it will output Push-Pull, Totem Pole as the output voltage. As far as the supply current of the power management is concerned, it is 7μA. You can always use MAX6865, the base supervisor number, to search for similar PMICs of the manufacturer.

MAX6865UK44D2S+T Features

Simple Reset/Power-On Reset type
Minimum supply voltage of 1.1V
7μA operating supply current

MAX6865UK44D2S+T Applications

There are a lot of Maxim Integrated MAX6865UK44D2S+T Voltage Supervisors applications.

• Dash board
• Utility meter
• Cloud computing
• Unattended substation automation
• Stable power system
• Set top box
• Sensitive sensors
• Important electronics for automotive safety
• Medical-specific insulation monitor
• Power distribution systems of ICU