MAX6865UK45D1S+T Overview
As far as the mounting terminals of this voltage supervisor are concerned, it has 5 in total. In terms of packaging, power management follows the Tape & Reel (TR) model. Power management is possible to find a series of 1 functions. On this supervisor, there is a series of 1 channels that can be found. Please refer to power management for SC-74A, SOT-753 functions. Several of the benefits of this PMIC are also shared by other Simple Reset/Power-On Reset products. The package peak reflow temperature is specified to be 260. When 2.5V is applied to the power ic, it conducts. In a 1 supply voltage, the PMIC chip conducts. Surface Mount mounts IC management. In this case, this PMIC chip can be sub-categorized as a Power Management Circuits chip. A total of 5 pins are located on this power management. There are 5 pins on the power managment ic. There should be a minimum voltage supply (Vsup) of 1.1V for this PMIC. The maximum supply voltage (Vsup) in this PMIC should not exceed 5.5V volts. The recommended mounting type for IC management is Surface Mount. The supervisors should be set to the following temperature: -40°C~85°C TA. There is an output voltage of Push-Pull, Totem Pole from this supervisor when it is operating. There is a 7μA supply current present in the power management. You can always use MAX6865, the base supervisor number, to search for similar PMICs of the manufacturer.
MAX6865UK45D1S+T Features
Simple Reset/Power-On Reset type
Minimum supply voltage of 1.1V
7μA operating supply current
MAX6865UK45D1S+T Applications
There are a lot of Maxim Integrated MAX6865UK45D1S+T Voltage Supervisors applications.
- Low voltage/high power - AI, GPU
- Battery cars
- Magnetic resonance imaging
- Electrical fire monitoring system
- Automotive power systems
- DC stabilized power supply module
- Data storage applications
- Automotive permanent magnet synchronous motors
- Power distribution systems of operating room
- Rechargeable batteries
