MAX6867UK20D1S+T Overview

There are 5 terminals on this power management that allow it to be mounted. Tape & Reel (TR)-packaging is used. In this PMIC, you can find 1 functions for your reference. There are 1 channels on this power managment ic that can be found in a series. IC management is packaged as a SC-74A, SOT-753 package. There are a number of benefits that this PMIC has in common with other Simple Reset/Power-On Reset manage ics. IC management is specified that the package peak reflow temperature should be 260. IC management conducts at a voltage of 2.5V. During operation, the power ic is supplied with a voltage of 1. Power management is included in the Surface Mount mount. As a subcategory, this PMIC chip can be categorized as Power Management Circuits. The total number of pins on this power management is 5. Pin count of the power management is 5. Normally, the supply voltage (Vsup) for this PMIC should not be lower than 1.1V. In this PMIC, the maximum supply voltage (Vsup) should not exceed 5.5V volts. Surface Mount mounting is recommended. This range of temperature should be set for the supervisors: -40°C~85°C TA. There is an output voltage of Push-Pull, Totem Pole from this supervisor when it is operating. It is estimated that the voltage supervisor's supply current is 7μA. To find similar IC managements from the manufacturer, you can always search by MAX6867.

MAX6867UK20D1S+T Features

Simple Reset/Power-On Reset type
Minimum supply voltage of 1.1V
7μA operating supply current

MAX6867UK20D1S+T Applications

There are a lot of Maxim Integrated MAX6867UK20D1S+T Voltage Supervisors applications.

• Automotive permanent magnet synchronous motors
• Solar power charger
• Satellite navigation
• Detection of phase sequence
• Battery cars
• Electric heating appliances
• Leakage protection
• Electronics installed in the vehicle
• Important electronics for automotive protection
• Data storage applications