MAX6870ETJ+ Overview

This power management consists of 32 mounting terminals on which it can be mounted. Packaged in a Tube-shape, IC management comes with a number of features. As a reference, this IC management includes 1 functions for your convenience. This power managment ic consists of 6 channels, each of which can be used independently. Please find attached 32-WQFN Exposed Pad functions for your reference in this IC power. There are a lot of similarities between this IC management and other Sequencer products. Packages are specified to have an average peak reflow temperature of 260. In a 6.5V supply voltage, the power management conducts. There is a voltage supply of 6 for the PMIC chip, and the chip conducts at that voltage. Surface Mount is the one that mounts power management. Taking into account all of the pins, this power management has a total of 32. Power managment ic pin count is 32. Normally, the supply voltage (Vsup) for this PMIC should not be lower than 2.7V. Voltage (Vsup) shouldn't exceed 13.2V volts in this PMIC. The mounting type of the supervisors is Surface MountWe recommend setting the supervisors to -40°C~85°C TA degrees. During operation, this power management system outputs Open Drain, Push-Pull. The supply current of the power management is 1.3mA. For similar manage ics search of the manufacturer, you can always refer to MAX6870, the base PMIC number.

MAX6870ETJ+ Features

Sequencer type
Minimum supply voltage of 2.7V
1.3mA operating supply current

MAX6870ETJ+ Applications

There are a lot of Maxim Integrated MAX6870ETJ+ Voltage Supervisors applications.

• Power distribution systems of CCU
• DC stabilized power supply module
• Microcontroller system
• Dash board
• Radio
• Electronics installed in the vehicle
• Embedded computing
• Electric heating appliances
• Battery-powered equipment
• Leakage current detection