MAX6889ETJ+ Overview

There are 32 terminals connected to this power management, which makes it easy to mount. There is a Tube-packaging method applied to IC management. Please find attached 1 functions for your reference in this IC power. Power management consists of 8 channels, each of which can be used independently. Please refer to power management for 32-WFQFN Exposed Pad functions. Compared to other Sequencer products, this PMIC has a lot of benefits to offer. Specifies a reflow peak temperature of 260 for the package during reflow. IC management conducts in a 8-voltage supply. Surface Mount is the one that mounts power management. As a subcategory, this PMIC chip can be categorized as Power Management Circuits. In total, IC powers are 32 pins on the board. 32 pins are present on the power management system. I should note that the minimum supply voltage (Vsup) for this IC management should be at least 2.7V, which is the minimum supply voltage that should be applied. There should be no more than 5.5V volts of maximum supply voltage (Vsup) in this power management. Power management recommends the Surface Mount mounting type. The supervisors should be set to the following temperature: -40°C~85°C TA. The output voltage of this power managment ic during operation is Open Drain, Push-Pull. The power management's supply current is 1.1mA. If you want to search for similar IC managements of this manufacturer, you can always refer to MAX6889, which is the base power ics number. It requires 3/56.5/13V watts of power to operate this voltage supervisor.

MAX6889ETJ+ Features

Sequencer type
Minimum supply voltage of 2.7V
1.1mA operating supply current

MAX6889ETJ+ Applications

There are a lot of Maxim Integrated MAX6889ETJ+ Voltage Supervisors applications.

• Low voltage/high power - AI, GPU
• Efficient information transmission
• Fire equipment power monitoring system
• Microcontroller system
• Battery cars
• Display equipment
• DVR
• Medical-specific isolation transformer
• Electronics installed in the vehicle
• FPGA design