MAX6898PALT+T Overview

There are 6 terminals on this power management that allow it to be mounted. Tape & Reel (TR)-packaging is used. The purpose of this IC management is to provide you with a reference of 1 functions. There are 1 channels on this power managment ic that can be found in a series. Please refer to power management for 6-WFDFN functions. This IC power shares lots of benefits with other Sequencer products. The package peak reflow temperature is specified to be 260. IC management conducts at a voltage of 3.3V. There is a voltage supply of 1 for the PMIC chip, and the chip conducts at that voltage. Surface Mount is the one that mounts power management. As a subcategory, this PMIC chip can be categorized as Power Management Circuits. In total, IC powers are 6 pins on the board. This power management has 6 pins. I should note that the minimum supply voltage (Vsup) for this IC management should be at least 1.5V, which is the minimum supply voltage that should be applied. It is recommended that the maximum supply voltage (Vsup) in this IC power be no more than 5.5V volts. A Surface Mount mounting type is recommended. We recommend setting the supervisors to -40°C~125°C TA degrees. The output voltage of this power managment ic during operation is Open Drain or Open Collector. Supplied with a operating current of 10μA, this PMIC is capable of fully function as specified. It is always advisable to use MAX6898, the base supervisor number, when searching for similar PMICs from the manufacturer.

MAX6898PALT+T Features

Sequencer type
Minimum supply voltage of 1.5V
10μA operating supply current

MAX6898PALT+T Applications

There are a lot of Maxim Integrated MAX6898PALT+T Voltage Supervisors applications.

• Telecommunications equipment
• DC stabilized power supply module
• Electronics installed in the vehicle
• Detection of phase sequence
• Set top box
• DVR
• Leakage current detection
• Dash board
• Linux and server computing
• Military communications