MAX691CWE Overview

Packaged in a Tube-shape, IC management comes with a number of features. For your reference, this PMIC includes a list of 16-SOIC (0.295, 7.50mm Width) functions. This IC power shares lots of benefits with other Battery Backup Circuit products. When 1 is applied to the power ic, it conducts. The power management is mounted by a Surface Mount-axis. In total, the power management has 16 pins in it. Pin count of the power management is 16. In order for this IC power to function, the supply voltage (Vsup) cannot be less than 4.75V. Voltage (Vsup) shouldn't exceed 5.5V volts in this PMIC. In this case, Surface Mount is the recommended mounting type. You should set the supervisor's temperature during 0°C~70°C TA . The output voltage of this power managment ic during operation is Push-Pull, Push-Pull. Supplied with a operating current of 350μA, this PMIC is capable of fully function as specified. If you want to search for similar IC managements of this manufacturer, you can always refer to MAX691, which is the base power ics number. The maximum supply temperature that PMIC chip can work with is 10mA. The frequency at which this IC power works is usually 247kHz kHz, which is sufficient for most applications that require this IC power to function.

MAX691CWE Features

Battery Backup Circuit type
Minimum supply voltage of 4.75V
350μA operating supply current

MAX691CWE Applications

There are a lot of Maxim Integrated MAX691CWE Voltage Supervisors applications.

• Detection of phase sequence
• Set top box
• External alarm
• Insulation fault location system
• Low voltage/high power - AI, GPU
• Detection of phase loss
• Electrical fire monitoring system
• Military electronics
• Solar power charger
• WiFi router