MAX693EJE Overview

There are 16 terminals on this power management that allow it to be mounted. As a reference, this IC management includes 1 functions for your convenience. This power managment ic consists of 1 channels, each of which can be used independently. The purpose of this IC power is to provide you with a reference of CDIP functions. There is a specification for the peak reflow temperature of the package to be 245. Manage ics operate at 5V supply voltages. Through Hole mounts IC management. The power management belongs to the Power Management Circuits subcategory. Taking into account all of the pins, this power management has a total of 16. 16 pins are on the supervisor. Normally, the supply voltage (Vsup) for this PMIC should not be lower than 4.5V. There should be no more than 5.5V volts of maximum supply voltage (Vsup) in this power management. The supervisor's supply current is specified to 10mA. Power management is also possible to add other features such as RESET THRESHOLD VOLTAGE IS 4.4V to name a few. Besides the IC types mentioned above, the power management system also includes other types such as POWER SUPPLY MANAGEMENT CIRCUIT. To be able to work, this power management requires 5V volts of power. At the most, voltage supervisor can work with a supply temperature of 10mA. On the supervisor, a total of 1 inputs are monitored as IC management of its monitoring system.

MAX693EJE Features

Minimum supply voltage of 4.5V
10mA operating supply current

MAX693EJE Applications

There are a lot of Maxim Integrated MAX693EJE Voltage Supervisors applications.

• Electronics installed in the vehicle
• Power communication system
• Insulation fault location system
• Functional modules
• Network equipment
• Telecommunications equipment
• Low voltage/high power - AI, GPU
• Utility meter
• Battery cars
• Solar power charger