MAX696EWE+ Overview

A total of 16 terminals are used to mount this power management. There is a Tube-packaging method applied to IC management. To assist you, this IC power includes 1 functions. This power management is made up of 1 channels which are available in a series format. Please refer to power management for 16-SOIC (0.295, 7.50mm Width) functions. This IC power shares lots of benefits with other Multi-Voltage Supervisor products. Specifies a reflow peak temperature of 260 for the package during reflow. When 2 is applied to the power ic, it conducts. Power management is included in the Surface Mount mount. This power ic can be sub-categorized as Power Management Circuits. There are a total of 16 pins on power management. 16 pins make up the power management. Normally, the supply voltage (Vsup) for this PMIC should not be lower than 3V. There should be no more than 5.5V volts of supply voltage (Vsup) in this power management. A Surface Mount mounting type is recommended. You should set the supervisor's temperature during -40°C~85°C TA . While this power management is operating, it will output Push-Pull, Push-Pull as the output voltage. The power management's supply current is 4mA. To find similar IC managements from the manufacturer, you can always search by MAX696. It is necessary to have 3.3/5V volts of power in order for this voltage supervisor to operate. At the most, voltage supervisor can work with a supply temperature of 300μA.

MAX696EWE+ Features

Multi-Voltage Supervisor type
Minimum supply voltage of 3V
4mA operating supply current

MAX696EWE+ Applications

There are a lot of Maxim Integrated MAX696EWE+ Voltage Supervisors applications.

• Solar power charger
• Insulation fault location system
• Battery cars
• Smartphones
• Radar
• Embedded computing
• Digitally controlled LDO regulators circuit
• Cloud computing
• Important electronics for automotive protection
• Power distribution systems of ICU