MAX696EWE+T Overview

It is mounted through 16 terminals on the power management. There is a Tape & Reel (TR)-packaging method applied to IC management. As a reference, this IC management includes 1 functions for your convenience. This power management is made up of 1 channels which are available in a series format. IC management is packaged as a 16-SOIC (0.295, 7.50mm Width) package. There are many benefits that this IC power shares with other Multi-Voltage Supervisor products as well. In order to ensure a good reflow performance, the package peak reflow temperature must be set at 260. When 2 is applied to the power ic, it conducts. The mount is attached to Surface Mount. Power Management Circuits is a subcategory of this PMIC chip. Power management has a total of 16 pins. The pins of the power management system count 16. Supply voltage (Vsup) should be at least 3V for this power management. This IC power should be powered by no more than 5.5V volts of supply voltage (Vsup). The recommended mounting type is Surface Mount. It is recommended that the supervisor be set to this temperature: -40°C~85°C TA. While in operation, this supervisor has a voltage output of Push-Pull, Push-Pull. There is a 300μA supply current present in the power management. You can always use MAX696, the base supervisor number, to search for similar PMICs of the manufacturer. It requires 3.3/5V watts of power to operate this voltage supervisor. A maximum supply temperature of 300μA can be used.

MAX696EWE+T Features

Multi-Voltage Supervisor type
Minimum supply voltage of 3V
300μA operating supply current

MAX696EWE+T Applications

There are a lot of Maxim Integrated MAX696EWE+T Voltage Supervisors applications.

• Dash board
• Efficient information transmission
• Functional modules
• Electrical fire monitoring system
• Low voltage/high power - AI, GPU
• Power distribution systems of CCU
• Personal computers
• Power distribution systems of operating room
• Transformer load monitoring equipment
• Leakage current detection