MAX697CPE+ Overview

This voltage supervisor has a total of 16 mounting terminals that can be used for mounting. Tube-packaging is used. The purpose of this IC management is to provide you with a reference of 1 functions. A series of 1 channels can be found on this supervisor. As a reference, this IC power includes 16-DIP (0.300, 7.62mm) functions for your convenience. There are a number of benefits that this PMIC has in common with other Multi-Voltage Supervisor manage ics. IC management is specified that the package peak reflow temperature should be 260. There is a voltage supply of 2 for the PMIC chip, and the chip conducts at that voltage. Through Hole is the one that mounts power management. This power ic can be sub-categorized as Power Management Circuits. In total, IC powers are 16 pins on the board. There are 16 pins on the power managment ic. It is recommended that the minimum supply voltage (Vsup) for this IC management should not be less than 3V volts. The maximum supply voltage (Vsup) in this PMIC should not exceed 5.5V volts. Through Hole mounting is recommended. It is recommended that the supervisor be set to this temperature: 0°C~70°C TA. As a result of this supervisor's operation, the output voltage is Push-Pull, Push-Pull. There is a supply current of 300μA for the power management. It is always advisable to use MAX697, the base supervisor number, when searching for similar PMICs from the manufacturer. To be able to work, this power management requires 3.3/5V volts of power. At the most, voltage supervisor can work with a supply temperature of 300μA.

MAX697CPE+ Features

Multi-Voltage Supervisor type
Minimum supply voltage of 3V
300μA operating supply current

MAX697CPE+ Applications

There are a lot of Maxim Integrated MAX697CPE+ Voltage Supervisors applications.

• emergency room
• Leakage current detection
• Electric heating appliances
• Network equipment
• External alarm
• WiFi router
• Smartphones
• FPGA design
• Detection of phase imbalance
• Fire equipment power monitoring system