MAX697CWE+T Overview

This power management consists of 16 mounting terminals on which it can be mounted. Packaged in the form of a Tape & Reel (TR), power management is easy to use. To assist you, this IC power includes 1 functions. There are 1 channels available on this supervisor, and each channel has a different function. Please refer to power management for 16-SOIC (0.295, 7.50mm Width) functions. With power management, you get a lot of benefits that you won't find in other Multi-Voltage Supervisor products. Specifies a reflow peak temperature of 260 for the package during reflow. When 2 is applied to the power ic, it conducts. The mount is provided by Surface Mount. The power management system can be categorized as a Power Management Circuits chip. It has a total of 16 pins that are attached to IC management. There should be a minimum voltage supply (Vsup) of 3V for this PMIC. The supply voltage (Vsup) should not exceed 5.5V volts in this IC power. Power management' mounting is recommended to be done with the Surface Mount type of mounting. The supervisors should be set to the following temperature: 0°C~70°C TA. While in operation, this supervisor has a voltage output of Push-Pull, Push-Pull. For this power management, there is an 300μA volt supply current. To find similar IC managements from the manufacturer, you can always search by MAX697. This power management requires 3.3/5V power to work. The maximum supply temperature that PMIC chip can work with is 300μA.

MAX697CWE+T Features

Multi-Voltage Supervisor type
Minimum supply voltage of 3V
300μA operating supply current

MAX697CWE+T Applications

There are a lot of Maxim Integrated MAX697CWE+T Voltage Supervisors applications.

• Smart meter
• Smartphones
• Electronics installed in the vehicle
• WiFi router
• Urban rail transit weak current power monitoring
• External alarm
• Sensitive sensors
• emergency room
• Detection of phase sequence
• Power distribution systems of ICU