MAX704RESA+ Overview

It is mounted through 8 terminals on the power management. It is packaged with Tube. For your reference, this IC power includes a list of 1 functions. This power managment ic consists of 1 channels, each of which can be used independently. For your reference, this PMIC includes a list of 8-SOIC (0.154, 3.90mm Width) functions. There are many benefits that this IC power shares with other Battery Backup Circuit products as well. In order to ensure a good reflow performance, the package peak reflow temperature must be set at 260. IC management is possible to find a succession of 1 voltages that have been checked. Power management is included in the Surface Mount mount. Power Management Circuits is a subcategory of this PMIC chip. There are a total of 8 pins on power management. 8 pins are present on the power management system. There should be a minimum voltage supply (Vsup) of 1.1V for this PMIC. It is recommended that the maximum supply voltage (Vsup) in this IC power be no more than 5.5V volts. In this case, Surface Mount is the recommended mounting type. The temperature of the supervisors should be set to this range: -40°C~85°C TA. During operation, this power management system outputs Push-Pull, Totem Pole. As far as the supply current of the power management is concerned, it is 50μA. It is always advisable to use MAX704, the base supervisor number, when searching for similar PMICs from the manufacturer. There is a requirement for 3/5V power to power this power management.

MAX704RESA+ Features

Battery Backup Circuit type
Minimum supply voltage of 1.1V
50μA operating supply current

MAX704RESA+ Applications

There are a lot of Maxim Integrated MAX704RESA+ Voltage Supervisors applications.

• Power distribution systems of CCU
• Telecommunications equipment
• Personal computers
• Consumer electronics
• Network equipment
• Power communication system
• Leakage protection
• Electronics installed in the vehicle
• Microprocessor system
• WiFi router