MAX705MJA Overview
A total of 8 terminals are used to mount this power management. There are 1 functions included in this PMIC so that you can refer to them. A series of 2 channels can be found on this supervisor. As a reference, this IC power includes CDIP functions for your convenience. As specified in the package specification, the peak reflow temperature of the package is set at 245. IC management conducts in a 5V-voltage supply. Power management is included in the Through Hole mount. It is possible to subcategorize this power ic as a Power Management Circuits chip. In total, it has 8 pins on IC management. There are 8 pins on the supervisor. IC management can only work with a supply voltage of 1.2V volts. During this IC power, the maximum supply voltage (Vsup) should not exceed 5.5V volts. Supplied with a operating current of 500μA, this PMIC is capable of fully function as specified. It is also possible to use other types of IC, such as POWER SUPPLY MANAGEMENT CIRCUIT, in this supervisor. A power supply of 5V watts is required for the operation of this power management. The maximum supply temperature that PMIC chip can work with is 500μA. In total, the voltage supervisor has 1 inputs which are monitored at the same time.
MAX705MJA Features
Minimum supply voltage of 1.2V
500μA operating supply current
MAX705MJA Applications
There are a lot of Maxim Integrated MAX705MJA Voltage Supervisors applications.
- Insulation fault location system
- Stable power system
- Digitally controlled LDO regulators circuit
- Automotive power systems
- Telecommunications equipment
- DVR
- Radar
- Power distribution systems of CCU
- Utility meter
- emergency room
