MAX706CPA+ Overview

This voltage supervisor has a total of 8 mounting terminals that can be used for mounting. Packaged in a Tube-shape, IC management comes with a number of features. There are 1 functions included in this PMIC so that you can refer to them. On this supervisor, there is a series of 2 channels that can be found. There are 8-DIP (0.300, 7.62mm) functions included in this PMIC so that you can refer to them. This IC power shares lots of benefits with other Simple Reset/Power-On Reset products. IC management is specified that the package peak reflow temperature should be 260. During operation, the power ic is supplied with a voltage of 5V. A supply voltage of 1 is used to conduct the PMIC chip. Through Hole is the one that mounts power management. As a subcategory, this PMIC chip can be categorized as Power Management Circuits. The total number of pins on this power management is 8. 8 pins are present on the power management system. It is recommended that Vsup should not be less than 1V for this IC power. During this IC power, the maximum supply voltage (Vsup) should not exceed 5.5V volts. Through Hole mounting is recommended. You should set the supervisor's temperature during 0°C~70°C TA . Power management has an output of Push-Pull, Totem Pole during operation. As far as the supply current of the power management is concerned, it is 350μA. For similar manage ics search of the manufacturer, you can always refer to MAX706, the base PMIC number. There is a requirement for 5V power to power this power management. A maximum supply temperature of 350μA can be used with this power management.

MAX706CPA+ Features

Simple Reset/Power-On Reset type
Minimum supply voltage of 1V
350μA operating supply current

MAX706CPA+ Applications

There are a lot of Maxim Integrated MAX706CPA+ Voltage Supervisors applications.

• Set top box
• Radar
• Power distribution systems of operating room
• Low voltage/high power - AI, GPU
• Functional modules
• Sensitive sensors
• Kitchen appliances
• Battery-powered equipment
• Refrigeration
• FPGA design