MAX706EPA+ Overview

Power management is mounted through 8 terminals. Power management is packaged in a Tube way. Power management is possible to find a series of 1 functions. A series of 2 channels can be found on this supervisor. IC management is packaged as a 8-DIP (0.300, 7.62mm) package. This IC power shares lots of benefits with other Simple Reset/Power-On Reset products. The package peak reflow temperature is specified to be 260. The supervisor is always powered by a 5V volt supply. IC management is possible to find a succession of 1 voltages that have been checked. Power management is included in the Through Hole mount. This power ic can be sub-categorized as Power Management Circuits. Power management has a total of 8 pins. The pins of the power management system count 8. IC management can only work with a supply voltage of 1.2V volts. In this PMIC, the maximum supply voltage (Vsup) should not exceed 5.5V volts. The mounting type of the supervisors is Through HoleThe temperature of the supervisors should be set to this range: -40°C~85°C TA. Power management has an output of Push-Pull, Totem Pole during operation. The supervisor's supply current is specified to 500μA. For similar manage ics search of the manufacturer, you can always refer to MAX706, the base PMIC number. This power management requires 5V power to work. Voltage supervisor can work with a supply temperature of 500μA at the most.

MAX706EPA+ Features

Simple Reset/Power-On Reset type
Minimum supply voltage of 1.2V
500μA operating supply current

MAX706EPA+ Applications

There are a lot of Maxim Integrated
MAX706EPA+ Voltage Supervisors applications.

• Power distribution systems of operating room
• Power distribution systems of infant care room
• Power distribution systems of ICU
• Power distribution systems of CCU
• emergency room
• Medical-specific isolation transformer
• Medical-specific insulation monitor
• Transformer load monitoring equipment
• External alarm
• Display equipment