MAX708RCSA+T Overview

Power management is mounted through 8 terminals. Tape & Reel (TR)-packaging is used. Please find attached 1 functions for your reference in this IC power. There are 2 channels available on this supervisor, and each channel has a different function. In this IC management you will find 8-SOIC (0.154, 3.90mm Width) functions for you to refer to. This IC power shares lots of benefits with other Simple Reset/Power-On Reset products. Specifies a reflow peak temperature of 260 for the package during reflow. The supervisor is always powered by a 3V volt supply. A supply voltage of 1 is used to conduct the PMIC chip. The power management is mounted by a Surface Mount-axis. Power Management Circuits is a subcategory of this PMIC chip. In total, the power management has 8 pins in it. This power management system has 8 pins. There should be a minimum voltage supply (Vsup) of 1V for this PMIC. This IC power should be powered by no more than 5.5V volts of supply voltage (Vsup). Power management recommends the Surface Mount mounting type. It is recommended to set the supervisor's temperature to this range: 0°C~70°C TA. When this power management system is in operation, it produces an output voltage of Push-Pull, Push-Pull. In order to maintain a stable supply current for the power management, 135μA is the recommended value. There are also other features in the software such as [0], just to mention a few. It is always advisable to use MAX708, the base supervisor number, when searching for similar PMICs from the manufacturer. This power management requires 3.3/5V power to work.

MAX708RCSA+T Features

Simple Reset/Power-On Reset type
Minimum supply voltage of 1V
135μA operating supply current

MAX708RCSA+T Applications

There are a lot of Maxim Integrated MAX708RCSA+T Voltage Supervisors applications.

• External alarm
• Automotive permanent magnet synchronous motors
• Unattended substation automation
• DVR
• Automotive power systems
• DC stabilized power supply module
• Radar
• Data storage applications
• WiFi router
• FPGA design