MAX708REUA+T Overview

It is mounted through 8 terminals on the power management. Packaged in a Tape & Reel (TR)-shape, IC management comes with a number of features. In this IC power you will find 1 functions for you to refer to. This power management is made up of 2 channels which are available in a series format. In this PMIC, you can find 8-TSSOP, 8-MSOP (0.118, 3.00mm Width) functions for your reference. As with other Simple Reset/Power-On Reset products, this IC management also offers a wide range of benefits. IC management is specified that the package peak reflow temperature should be 260. The supervisor is always powered by a 3V volt supply. During operation, the power ic is supplied with a voltage of 1. By Surface Mount, IC management has been mounted. The power management system can be categorized as a Power Management Circuits chip. In total, the power management has 8 pins in it. Pin count of the power management is 8. Supply voltage (Vsup) should be at least 1.2V for this power management. There should be no more than 5.5V volts of supply voltage (Vsup) in this power management. Power management' mounting is recommended to be done with the Surface Mount type of mounting. The temperature of the supervisors should be set to this range: -40°C~85°C TA. As this power managment ic operates, it is able to produce an output voltage of Push-Pull, Push-Pull. The supply current of the power management is 135μA. In addition, IC management are other features such as [0], to mention only a few. If you want to search for similar IC managements of this manufacturer, you can always refer to MAX708, which is the base power ics number. The voltage supervisor requires a power source of 3.3/5V volts in order to work correctly.

MAX708REUA+T Features

Simple Reset/Power-On Reset type
Minimum supply voltage of 1.2V
135μA operating supply current

MAX708REUA+T Applications

There are a lot of Maxim Integrated MAX708REUA+T Voltage Supervisors applications.

• Network equipment
• Set top box
• Embedded computing
• Insulation fault location system
• Stable power system
• Urban rail transit weak current power monitoring
• Refrigeration
• Detection of phase sequence
• Leakage current detection
• Electronics installed in the vehicle