MAX734EPA+ Overview

There are 1 outputs supported by the voltage regulator. The alternator regulator is packaged in a PDIP container to facilitate transportation. There are 8terminals on the voltage regulator. The electronic part is widely regarded as a regulator of type SWITCHING REGULATOR. The PCB or other board has a Through Hole for mounting. In this power supply regulator, there are 8 pins. A temperature lower than -40°Cis not suitable for the shunt regulator. The temperature should not exceed 85°C. For normal operation, a voltage of 12V is required. There should be a 120mA output from the external regulator at present. There must be an input voltage higher than 4.75Vin order to operate this rectifier regulator. DC voltage regulators can operate at a frequency of 170kHz. A maximum current of 120mAis intended to be produced by the voltage regulator.

MAX734EPA+ Features

SWITCHING REGULATOR analog IC
Supply voltage: 12V

MAX734EPA+ Applications

There are a lot of Maxim Integrated MAX734EPA+ Specialized Voltage Regulators applications.

• Portable GPS
• SDRAM Termination Voltage for DDR?2 / DDR?3
• Printers
• Desktop PC's
• Car Navigation Displays
• Distributed power architectures (24 V/48 V bus)
• Communications Infrastructure
• Notebook Computer Displays
• Telecom/Datacom
• Graphics Processor Core Supplies