MAX793RESE+T Overview

A total of 16 terminals are used to mount this power management. Power management is packaged in a Tape & Reel (TR) way. There are 1 functions included in this PMIC so that you can refer to them. There are 2 channels on this power managment ic that can be found in a series. The purpose of this IC power is to provide you with a reference of 16-SOIC (0.154, 3.90mm Width) functions. It is a IC power that shares many benefits with other products from the Battery Backup Circuit line. IC management is specified that the package peak reflow temperature should be 260. The supervisor is always powered by a 3V volt supply. A supply voltage of 1 is used to conduct the PMIC chip. Surface Mount mounts power management on the wall. The power management system can be categorized as a Power Management Circuits chip. 16 pins are present in total in this power management. 16 pins are on the supervisor. Normally, the supply voltage (Vsup) for this PMIC should not be lower than 1.1V. This IC power should be powered by no more than 5.5V volts of supply voltage (Vsup). A Surface Mount mounting type is recommended. The supervisors should be set to the following temperature: -40°C~85°C TA. The output voltage of this power managment ic during operation is Open Drain, Push-Pull. Supplied with a operating current of 62μA, this PMIC is capable of fully function as specified. If you want to search for similar IC managements of this manufacturer, you can always refer to MAX793, which is the base power ics number. In order to operate this power management, it requires 3/5V volts of power.

MAX793RESE+T Features

Battery Backup Circuit type
Minimum supply voltage of 1.1V
62μA operating supply current

MAX793RESE+T Applications

There are a lot of Maxim Integrated MAX793RESE+T Voltage Supervisors applications.

• Power distribution systems of CCU
• Sensitive sensors
• Telecommunications equipment
• Precision measurement
• DSP
• Battery cars
• Embedded computing
• Rechargeable batteries
• Detection of phase loss
• Electronics installed in the vehicle