MAX794CSE+ Overview

It is mounted through 16 terminals on the power management. Packaging is in the form of a Tube. Please find attached 1 functions for your reference in this IC power. It is possible to find on this power management a series of 2 channels. Please refer to power management for 16-SOIC (0.154, 3.90mm Width) functions. It is a IC power that shares many benefits with other products from the Battery Backup Circuit line. There is a specification for the peak reflow temperature of the package to be 260. The supervisor is always powered by a 3V volt supply. A supply voltage of 1 is used to conduct the PMIC chip. Surface Mount is the one that mounts power management. It is possible to subcategorize this power ic as a Power Management Circuits chip. In total, IC powers are 16 pins on the board. Pin count of the power management is 16. It is recommended that the minimum supply voltage (Vsup) for this IC management should not be less than 1V volts. The maximum supply voltage (Vsup) is not to exceed 5.5V volts in this IC management. The mounting type of the supervisors is Surface MountThe supervisors should be set to the following temperature: 0°C~70°C TA. While in operation, this supervisor has a voltage output of Open Drain, Push-Pull. There is a 62μA supply current present in the power management. It is always advisable to use MAX794, the base supervisor number, when searching for similar PMICs from the manufacturer. In order to operate this power management, it requires 3/5V volts of power.

MAX794CSE+ Features

Battery Backup Circuit type
Minimum supply voltage of 1V
62μA operating supply current

MAX794CSE+ Applications

There are a lot of Maxim Integrated MAX794CSE+ Voltage Supervisors applications.

• Power distribution systems of infant care room
• Sensitive sensors
• Household appliances
• Radio
• Magnetic resonance imaging
• Smartphones
• Important electronics for automotive protection
• WiFi router
• External alarm
• Microcontroller system