MAX795TESA+ Overview

This power management consists of 8 mounting terminals on which it can be mounted. In terms of packaging, power management follows the Tube model. To assist you, this IC power includes 1 functions. There are 2 channels available on this supervisor, and each channel has a different function. There are 8-SOIC (0.154, 3.90mm Width) functions included in this PMIC so that you can refer to them. There are a number of benefits that this PMIC has in common with other Battery Backup Circuit manage ics. According to the specification, the package's peak reflow temperature is specified to be 260. The supervisor is always powered by a 3.3V volt supply. IC management conducts in a 1-voltage supply. Power management is included in the Surface Mount mount. There is a subcategory called Power Management Circuits for this power management. A total of 8 pins are located on this power management. There are 8 pins on the supervisor. In order for this IC power to function, the supply voltage (Vsup) cannot be less than 1.1V. There should be no more than 5.5V volts of maximum supply voltage (Vsup) in this power management. The mounting type of the supervisors is Surface MountWe recommend setting the supervisors to -40°C~85°C TA degrees. The output voltage of this power managment ic during operation is Open Drain or Open Collector. There is a supply current of 49μA for the power management. To find similar IC managements from the manufacturer, you can always search by MAX795. It requires 3.3/5V watts of power to operate this voltage supervisor.

MAX795TESA+ Features

Battery Backup Circuit type
Minimum supply voltage of 1.1V
49μA operating supply current

MAX795TESA+ Applications

There are a lot of Maxim Integrated MAX795TESA+ Voltage Supervisors applications.

• Power distribution systems of ICU
• Sensitive sensors
• Smart meter
• Dash board
• Military communications
• Microprocessor system
• WiFi router
• Transformer load monitoring equipment
• DSP
• Medical-specific insulation monitor