MAX802TEPA+ Overview

As far as the mounting terminals of this voltage supervisor are concerned, it has 8 in total. Power management is possible to find a series of 1 functions. On this supervisor, there is a series of 1 channels that can be found. For your reference, this PMIC includes a list of 8-DIP (0.300, 7.62mm) functions. There are a lot of similarities between this IC management and other Battery Backup Circuit products. The package peak reflow temperature is specified to be 260. When a supply voltage of 1 is applied to the power ic, it conducts. Using Through Hole, IC management is mounted. As a subcategory, this PMIC chip can be categorized as Power Management Circuits. In total, the power management has 8 pins in it. 8 pins make up the power management. It is recommended that Vsup should not be less than 1.1V for this IC power. The supply voltage (Vsup) should not exceed 5.5V volts in this IC power. Mounting type Through Hole is recommended. We recommend setting the supervisors to -40°C~85°C TA degrees. As a result of this supervisor's operation, the output voltage is Push-Pull, Totem Pole. The power management must be powered by 3/5V volts to function properly.

MAX802TEPA+ Features

Battery Backup Circuit type
Minimum supply voltage of 1.1V

MAX802TEPA+ Applications

There are a lot of Maxim Integrated MAX802TEPA+ Voltage Supervisors applications.

• Functional modules
• Leakage current detection
• DC stabilized power supply module
• Low voltage/high power - AI, GPU
• Medical-specific insulation monitor
• Rechargeable batteries
• Digitally controlled LDO regulators circuit
• Microprocessor system
• Electric heating appliances
• Urban rail transit weak current power monitoring