MAX802TESA+T Overview

Power management is mounted through 8 terminals. This power ic is packaged in a way that looks like a Tape & Reel (TR). The purpose of this IC management is to provide you with a reference of 1 functions. A series of 1 channels can be found on this supervisor. In this PMIC, you can find 8-SOIC (0.154, 3.90mm Width) functions for your reference. There are a lot of similarities between this IC power and other Battery Backup Circuit products. Specifies a reflow peak temperature of 260 for the package during reflow. There is a voltage supply of 1 for the PMIC chip, and the chip conducts at that voltage. The mount is attached to Surface Mount. The power management belongs to the Power Management Circuits subcategory. In total, the power management has 8 pins in it. There are 8 pins on the supervisor. It is recommended that Vsup should not be less than 1.1V for this IC power. The supply voltage (Vsup) should not exceed 5.5V volts in this IC power. Power management recommends the Surface Mount mounting type. We recommend setting the supervisors to -40°C~85°C TA degrees. There is an output voltage of Push-Pull, Totem Pole from this supervisor when it is operating. For similar manage ics search of the manufacturer, you can always refer to MAX802, the base PMIC number. It requires 3/5V watts of power to operate this voltage supervisor.

MAX802TESA+T Features

Battery Backup Circuit type
Minimum supply voltage of 1.1V

MAX802TESA+T Applications

There are a lot of Maxim Integrated MAX802TESA+T Voltage Supervisors applications.

• Magnetic resonance imaging
• Utility meter
• Important electronics for automotive safety
• Smartphones
• Digitally controlled LDO regulators circuit
• Household appliances
• Rechargeable batteries
• Leakage current detection
• Power communication system
• Unattended substation automation