MAX804RCPA+ Overview

It is mounted through 8 terminals on the power management. A Tube package is used to package the power management. As a reference, this IC management includes 1 functions for your convenience. There are 1 channels on this power managment ic that can be found in a series. In this PMIC, you can find 8-DIP (0.300, 7.62mm) functions for your reference. As with other Battery Backup Circuit products, this IC management also offers a wide range of benefits. In order to ensure a good reflow performance, the package peak reflow temperature must be set at 260. IC management conducts in a 1-voltage supply. Through Hole mounts IC management. As a subcategory, this PMIC chip can be categorized as Power Management Circuits. In total, the power management has 8 pins in it. Normally, the supply voltage (Vsup) for this PMIC should not be lower than 1V. During this IC power, the maximum supply voltage (Vsup) should not exceed 5.5V volts. The recommended mounting type is Through Hole. The supervisors should be set to the following temperature: 0°C~70°C TA. While in operation, this supervisor has a voltage output of Open Drain, Open Drain. The supply current of the power management is 50μA. A similar IC managements number of the manufacturer can always be found by using MAX804, the base power ics number. This power management requires 3/5V power to work.

MAX804RCPA+ Features

Battery Backup Circuit type
Minimum supply voltage of 1V
50μA operating supply current

MAX804RCPA+ Applications

There are a lot of Maxim Integrated MAX804RCPA+ Voltage Supervisors applications.

• Automotive permanent magnet synchronous motors
• DSP
• Low voltage/high power - AI, GPU
• Battery cars
• Electric heating appliances
• External alarm
• Functional modules
• Detection of phase imbalance
• Cloud computing
• Power distribution systems of infant care room