MAX804SCSA+ Overview

A total of 8 terminals are used to mount this power management. Power management is packaged in a Tube way. Please find attached 1 functions for your reference in this IC power. There are 1 channels on this power managment ic that can be found in a series. There are 8-SOIC (0.154, 3.90mm Width) functions included in this PMIC so that you can refer to them. As with other Battery Backup Circuit products, this IC management also offers a wide range of benefits. In order to ensure a good reflow performance, the package peak reflow temperature must be set at 260. A supply voltage of 1 is used to conduct the PMIC chip. The mount is attached to Surface Mount. There is a subcategory called Power Management Circuits for this power management. Taking into account all of the pins, this power management has a total of 8. There are 8 pins on the supervisor. Normally, the supply voltage (Vsup) for this PMIC should not be lower than 1V. The supply voltage (Vsup) should not exceed 5.5V volts in this IC power. A Surface Mount mounting type is recommended. We recommend setting the supervisors to 0°C~70°C TA degrees. While this power management is operating, it will output Open Drain, Open Drain as the output voltage. There is a 50μA supply current present in the power management. To find similar IC managements from the manufacturer, you can always search by MAX804. To be able to work, this power management requires 3/5V volts of power.

MAX804SCSA+ Features

Battery Backup Circuit type
Minimum supply voltage of 1V
50μA operating supply current

MAX804SCSA+ Applications

There are a lot of Maxim Integrated MAX804SCSA+ Voltage Supervisors applications.

• WiFi router
• Detection of phase imbalance
• Urban rail transit weak current power monitoring
• External alarm
• Automotive permanent magnet synchronous motors
• Computer applications
• Battery cars
• Smart meter
• Detection of phase loss
• Low voltage/high power - AI, GPU