MAX804TCSA+ Overview

As you can see, this power management is mounted through 8 terminals. It is packaged with Tube. Please find attached 1 functions for your reference in this IC power. This power management is made up of 1 channels which are available in a series format. There are 8-SOIC (0.154, 3.90mm Width) functions included in this PMIC so that you can refer to them. It is a IC power that shares many benefits with other products from the Battery Backup Circuit line. Packages are specified to have an average peak reflow temperature of 260. IC management is possible to find a succession of 1 voltages that have been checked. The mount is attached to Surface Mount. This power ic can be sub-categorized as Power Management Circuits. A total of 8 pins are located on this power management. This power management has 8 pins. I should note that the minimum supply voltage (Vsup) for this IC management should be at least 1V, which is the minimum supply voltage that should be applied. The maximum supply voltage (Vsup) is not to exceed 5.5V volts in this IC management. The recommended mounting type for IC management is Surface Mount. The temperature of the supervisors should be set to this range: 0°C~70°C TA. As this power managment ic operates, it is able to produce an output voltage of Open Drain, Open Drain. There is a supply current of 50μA for the power management. A similar IC managements number of the manufacturer can always be found by using MAX804, the base power ics number. The voltage supervisor requires a power source of 3/5V volts in order to work correctly.

MAX804TCSA+ Features

Battery Backup Circuit type
Minimum supply voltage of 1V
50μA operating supply current

MAX804TCSA+ Applications

There are a lot of Maxim Integrated MAX804TCSA+ Voltage Supervisors applications.

• Microprocessor system
• Dash board
• Digitally controlled LDO regulators circuit
• Medical-specific insulation monitor
• emergency room
• Radio
• Low voltage/high power - AI, GPU
• DSP
• Functional modules
• Consumer electronics