This voltage supervisor has a total of 8 mounting terminals that can be used for mounting. There is a Tape & Reel (TR)-packaging method applied to IC management. Please refer to this PMIC for 1 functions. There are a total of 1 channels on this supervisor, and they are arranged in a series. Please find attached 8-SOIC (0.154, 3.90mm Width) functions for your reference in this IC power. Several of the benefits of this PMIC are also shared by other Battery Backup Circuit products. During the reflow process, a peak temperature of 260 is specified for the package. In a 5V supply voltage, the power management conducts. Power ics operate at 1 supply voltages. The mount is provided by Surface Mount. Power Management Circuits is a subcategory of this PMIC chip. It has a total of 8 pins that are attached to IC management. Pin count of the power management is 8. A voltage (Vsup) that doesn't fall below 1.2V as the minimum supply voltage (Vsup) should be applied to this IC power in order to ensure its proper operation. In this PMIC, the maximum supply voltage (Vsup) should not exceed 5.5V volts. Power management' mounting is recommended to be done with the Surface Mount type of mounting. The supervisors should be set to the following temperature: -40°C~85°C TA. When this power management system is in operation, it produces an output voltage of Push-Pull, Totem Pole. There is a 500μA supply current present in the power management. Additionally, IC management are a variety of features, for example [0], to name a few. A similar IC managements number of the manufacturer can always be found by using MAX805, the base power ics number. In order to operate this power management, it requires 5V volts of power. Voltage supervisor can work with a supply temperature of 500μA at the most.
MAX805LESA+T Features
Battery Backup Circuit type Minimum supply voltage of 1.2V 500μA operating supply current
MAX805LESA+T Applications
There are a lot of Maxim Integrated MAX805LESA+T Voltage Supervisors applications.