MAX807LCWE+T Overview

There are 16 terminals on this power management that allow it to be mounted. It is packaged with Tape & Reel (TR). The purpose of this IC management is to provide you with a reference of 1 functions. Depending on the power managment ic you are looking at, you can find a total of 3 channels. IC management is packaged as a 16-SOIC (0.295, 7.50mm Width) package. There are a lot of similarities between this IC power and other Battery Backup Circuit products. Specifies a reflow peak temperature of 260 for the package during reflow. When a supply voltage of 5V is applied to the power ic, it conducts. During operation, the power ic is supplied with a voltage of 1. Surface Mount mounts power management on the wall. A IC power such as this can be classified as a Power Management Circuits power management system. Power management has a total of 16 pins. Pin count of the power management is 16. In order for this IC power to function, the supply voltage (Vsup) cannot be less than 0V. In this PMIC, the maximum supply voltage (Vsup) should not exceed 5.5V volts. Power management' mounting is recommended to be done with the Surface Mount type of mounting. It is recommended to set the supervisor's temperature to this range: 0°C~70°C TA. The power management's supply current is 70μA. You can always use MAX807, the base supervisor number, to search for similar PMICs of the manufacturer. A power supply of 5V watts is required for the operation of this power management.

MAX807LCWE+T Features

Battery Backup Circuit type
Minimum supply voltage of 0V
70μA operating supply current

MAX807LCWE+T Applications

There are a lot of Maxim Integrated MAX807LCWE+T Voltage Supervisors applications.

• WiFi router
• Detection of phase loss
• Magnetic resonance imaging
• Power distribution systems of infant care room
• Computer applications
• Medical-specific insulation monitor
• Smart meter
• Battery-powered equipment
• Radio
• Battery cars