MAX807LEPE+ Overview

There are 16 terminals connected to this power management, which makes it easy to mount. It is packaged with Tube. Power management is possible to find a series of 1 functions. This power management is made up of 1 channels which are available in a series format. In this IC management you will find 16-DIP (0.300, 7.62mm) functions for you to refer to. As with other Battery Backup Circuit products, this IC management also offers a wide range of benefits. Specifies a reflow peak temperature of 260 for the package during reflow. There is a voltage supply of 5V for the PMIC chip, and the chip conducts at that voltage. When 1 is applied to the power ic, it conducts. Through Hole mounts IC management. In this case, this PMIC chip can be sub-categorized as a Power Management Circuits chip. The total number of pins on this power management is 16. The pins of the power management system count 16. Supply voltage (Vsup) should be at least 0V for this power management. This IC power should be powered by no more than 5.5V volts of supply voltage (Vsup). Power management recommends the Through Hole mounting type. We recommend setting the supervisors to -40°C~85°C TA degrees. The supervisor's supply current is specified to 70μA. A similar IC managements number of the manufacturer can always be found by using MAX807, the base power ics number. A power supply of 5V watts is required for the operation of this power management.

MAX807LEPE+ Features

Battery Backup Circuit type
Minimum supply voltage of 0V
70μA operating supply current

MAX807LEPE+ Applications

There are a lot of Maxim Integrated MAX807LEPE+ Voltage Supervisors applications.

• Battery cars
• Automotive permanent magnet synchronous motors
• Cloud computing
• Medical-specific isolation transformer
• Battery cars
• Leakage protection
• Multi-voltage system
• FPGA design
• Display equipment
• Power distribution systems of CCU