MAX807MCPE+ Overview

Power management is mounted through 16 terminals. Tube-packaging is used. Power management is possible to find a series of 1 functions. A series of 1 channels can be found on this supervisor. In this IC management you will find 16-DIP (0.300, 7.62mm) functions for you to refer to. This IC power shares lots of benefits with other Battery Backup Circuit products. IC management is specified that the package peak reflow temperature should be 260. When a supply voltage of 5V is applied to the power ic, it conducts. A supply voltage of 1 is used to conduct the PMIC chip. Through Hole mounts IC management. Power Management Circuits is a subcategory of this PMIC chip. There are a total of 16 pins on power management. This power management has 16 pins. It is recommended that Vsup should not be less than 0V for this IC power. There should be no more than 5.5V volts of supply voltage (Vsup) in this power management. The recommended mounting type is Through Hole. The temperature of the supervisors should be set to this range: 0°C~70°C TA. As far as the supply current of the power management is concerned, it is 70μA. There are also other features in the software such as [0], just to mention a few. To find similar IC managements from the manufacturer, you can always search by MAX807. It requires 5V watts of power to operate this voltage supervisor.

MAX807MCPE+ Features

Battery Backup Circuit type
Minimum supply voltage of 0V
70μA operating supply current

MAX807MCPE+ Applications

There are a lot of Maxim Integrated MAX807MCPE+ Voltage Supervisors applications.

• Battery cars
• Detection of phase sequence
• Linux and server computing
• Medical-specific isolation transformer
• External alarm
• Set top box
• Important electronics for automotive protection
• Power communication system
• Magnetic resonance imaging
• Efficient information transmission