MAX808MEPA+ Overview

As you can see, this power management is mounted through 8 terminals. Packaged in the form of a Tube, power management is easy to use. To assist you, this IC power includes 1 functions. A series of 1 channels can be found on this supervisor. As a reference, this IC power includes 8-DIP (0.300, 7.62mm) functions for your convenience. It is a IC power that shares many benefits with other products from the Battery Backup Circuit line. In order to ensure a good reflow performance, the package peak reflow temperature must be set at 260. There is a voltage supply of 5V for the PMIC chip, and the chip conducts at that voltage. A supply voltage of 1 is used to conduct the PMIC chip. Through Hole mounts power management on the wall. A IC power such as this can be classified as a Power Management Circuits power management system. Power management has a total of 8 pins. This power management system has 8 pins. It is recommended that the minimum supply voltage (Vsup) for this IC management should not be less than 0V volts. During this IC power, the maximum supply voltage (Vsup) should not exceed 5.5V volts. Mounting type Through Hole is recommended. Temperature setting for the supervisors should be -40°C~85°C TA. As far as the supply current of the power management is concerned, it is 48μA. There are also other features in the software such as [0], just to mention a few. You can always use MAX808, the base supervisor number, to search for similar PMICs of the manufacturer. The voltage supervisor requires a power source of 5V volts in order to work correctly.

MAX808MEPA+ Features

Battery Backup Circuit type
Minimum supply voltage of 0V
48μA operating supply current

MAX808MEPA+ Applications

There are a lot of Maxim Integrated MAX808MEPA+ Voltage Supervisors applications.

• Leakage protection
• Electrical fire monitoring system
• Radar
• Consumer electronics
• Household appliances
• Important electronics for automotive safety
• Detection of phase loss
• Power communication system
• emergency room
• Analog circuit