MAX808NCPA+ Overview

This voltage supervisor has a total of 8 mounting terminals that can be used for mounting. A Tube package is used to package the power management. In this IC power you will find 1 functions for you to refer to. It is possible to find on this power management a series of 1 channels. For your reference, this PMIC includes a list of 8-DIP (0.300, 7.62mm) functions. Several of the benefits of this PMIC are also shared by other Battery Backup Circuit products. IC management is specified that the package peak reflow temperature should be 260. A supply voltage of 5V is used to conduct the PMIC chip. A supply voltage of 1 is used to conduct the PMIC chip. The mount is provided by Through Hole. It is possible to subcategorize this power ic as a Power Management Circuits chip. In total, it has 8 pins on IC management. There are 8 pins on the power managment ic. In order for this PMIC to work correctly, the minimum supply voltage (Vsup) should be greater than 0V. The maximum supply voltage (Vsup) in this PMIC should not exceed 5.5V volts. The recommended mounting type for IC management is Through Hole. We recommend setting the supervisors to 0°C~70°C TA degrees. The supervisor's supply current is specified to 48μA. Among other features, IC power can be also taken advantage of [0], for instance. A similar IC managements number of the manufacturer can always be found by using MAX808, the base power ics number. To be able to work, this power management requires 5V volts of power.

MAX808NCPA+ Features

Battery Backup Circuit type
Minimum supply voltage of 0V
48μA operating supply current

MAX808NCPA+ Applications

There are a lot of Maxim Integrated MAX808NCPA+ Voltage Supervisors applications.

• Solar power charger
• Satellite navigation
• Data storage applications
• Automotive permanent magnet synchronous motors
• Electronics installed in the vehicle
• Military electronics
• Power communication system
• Network equipment
• Microcontroller system
• Display equipment