MAX808NCSA+ Overview

This power management consists of 8 mounting terminals on which it can be mounted. This power ic is packaged in a way that looks like a Tube. Please find attached 1 functions for your reference in this IC power. This power managment ic consists of 1 channels, each of which can be used independently. Please refer to power management for 8-SOIC (0.154, 3.90mm Width) functions. There are a number of benefits that this PMIC has in common with other Battery Backup Circuit manage ics. Specifies a reflow peak temperature of 260 for the package during reflow. There is a voltage supply of 5V for the PMIC chip, and the chip conducts at that voltage. When 1 is applied to the power ic, it conducts. The power management is mounted by Surface Mount. In this case, this PMIC chip can be sub-categorized as a Power Management Circuits chip. In total, it has 8 pins on IC management. 8 pins make up the power management. In order for this IC power to function, the supply voltage (Vsup) cannot be less than 0V. The supply voltage (Vsup) should not exceed 5.5V volts in this IC power. The recommended mounting type is Surface Mount. This range of temperature should be set for the supervisors: 0°C~70°C TA. As far as the supply current of the power management is concerned, it is 48μA. There are other features such as CMOS RAM WRITE PROTECTION, BATTERY-BACKUP MODE to name a few. It is always advisable to use MAX808, the base supervisor number, when searching for similar PMICs from the manufacturer. In order to operate this power management, it requires 5V volts of power.

MAX808NCSA+ Features

Battery Backup Circuit type
Minimum supply voltage of 0V
48μA operating supply current

MAX808NCSA+ Applications

There are a lot of Maxim Integrated MAX808NCSA+ Voltage Supervisors applications.

• Transformer load monitoring equipment
• Microprocessor system
• Radar
• Insulation fault location system
• Telecommunications equipment
• Consumer electronics
• Smart meter
• Linux and server computing
• Magnetic resonance imaging
• DC stabilized power supply module