MAX810LEUR+T10 Overview

There are 3 terminals on this power management that allow it to be mounted. Tape & Reel (TR)-packaging is used. To assist you, this IC power includes 1 functions. On this supervisor, there is a series of 1 channels that can be found. There are TO-236-3, SC-59, SOT-23-3 functions included in this PMIC so that you can refer to them. This IC power shares lots of benefits with other Simple Reset/Power-On Reset products. During the reflow process, a peak temperature of 260 is specified for the package. A supply voltage of 5V is used to conduct the PMIC chip. In a 1 supply voltage, the PMIC chip conducts. Surface Mount mounts power management on the wall. In this case, this PMIC chip can be sub-categorized as a Power Management Circuits chip. In total, it has 3 pins on IC management. This power management system has 3 pins. IC management can only work with a supply voltage of 1.2V volts. This IC power should be powered by no more than 5.5V volts of supply voltage (Vsup). The recommended mounting type for IC management is Surface Mount. The temperature of the supervisors should be set to this range: -40°C~105°C TA. As this power managment ic operates, it is able to produce an output voltage of Push-Pull, Totem Pole. In order to maintain a stable supply current for the power management, 24μA is the recommended value. A similar IC managements number of the manufacturer can always be found by using MAX810, the base power ics number. There is a requirement for 5V power to power this power management.

MAX810LEUR+T10 Features

Simple Reset/Power-On Reset type
Minimum supply voltage of 1.2V
24μA operating supply current

MAX810LEUR+T10 Applications

There are a lot of Maxim Integrated MAX810LEUR+T10 Voltage Supervisors applications.

• Embedded computing
• Urban rail transit weak current power monitoring
• Sensitive sensors
• Microcontroller system
• Power communication system
• emergency room
• Cloud computing
• Radio
• Battery cars
• Medical-specific isolation transformer