MAX814TEPA+ Overview

It is mounted through 8 terminals on the power management. Tube-packaging is used. Power management is possible to find a series of 1 functions. On this supervisor, there is a series of 1 channels that can be found. The purpose of this IC power is to provide you with a reference of DIP functions. There are a lot of similarities between this IC power and other Simple Reset/Power-On Reset products. In order to ensure a good reflow performance, the package peak reflow temperature must be set at 260. The supervisor is always powered by a 3.07V volt supply. IC management is possible to find a succession of 1 voltages that have been checked. The mount is attached to Through Hole. A IC power such as this can be classified as a Power Management Circuits power management system. It has a total of 8 pins that are attached to IC management. 8 pins make up the power management. In order for this PMIC to work correctly, the minimum supply voltage (Vsup) should be greater than 1.2V. The supply voltage (Vsup) should not exceed 5.5V volts in this IC power. The power management's supply current is 85μA. Additionally, IC management are a variety of features, for example [0], to name a few. A maximum supply temperature of 85μA can be used with this power management.

MAX814TEPA+ Features

Simple Reset/Power-On Reset type
Minimum supply voltage of 1.2V
85μA operating supply current

MAX814TEPA+ Applications

There are a lot of Maxim Integrated MAX814TEPA+ Voltage Supervisors applications.

• Utility meter
• Efficient information transmission
• Kitchen appliances
• Power distribution systems of CCU
• Telecommunications equipment
• Power distribution systems of infant care room
• Embedded computing
• Detection of phase loss
• Low voltage/high power - AI, GPU
• emergency room