MAX819LEPA+ Overview

A total of 8 terminals are used to mount this power management. This power ic is packaged in a way that looks like a Tube. Please refer to this PMIC for 1 functions. There are a total of 1 channels on this supervisor, and they are arranged in a series. Please refer to power management for 8-DIP (0.300, 7.62mm) functions. Compared to other Battery Backup Circuit products, this PMIC has a lot of benefits to offer. During the reflow process, a peak temperature of 260 is specified for the package. Manage ics operate at 4.75V supply voltages. Power ics operate at 1 supply voltages. The power management is mounted by Through Hole. There is a subcategory of this power ic known as Power Management Circuits. There are a total of 8 pins on power management. Power managment ic pin count is 8. Normally, the supply voltage (Vsup) for this PMIC should not be lower than 0V. There should be no more than 5.5V volts of supply voltage (Vsup) in this power management. Mounting type Through Hole is recommended. You should set the supervisor's temperature during -40°C~85°C TA . It is estimated that the voltage supervisor's supply current is 11μA. It is always advisable to use MAX819, the base supervisor number, when searching for similar PMICs from the manufacturer. It is necessary to have 5V volts of power in order for this voltage supervisor to operate.

MAX819LEPA+ Features

Battery Backup Circuit type
Minimum supply voltage of 0V
11μA operating supply current

MAX819LEPA+ Applications

There are a lot of Maxim Integrated
MAX819LEPA+ Voltage Supervisors applications.

• Power distribution systems of ICU
• Power distribution systems of CCU
• emergency room
• Medical-specific isolation transformer
• Medical-specific insulation monitor
• Transformer load monitoring equipment
• External alarm
• Display equipment
• DC stabilized power supply module
• Insulation fault location system