MAX819MCPA+ Overview

There are 8 terminals connected to this power management, which makes it easy to mount. A Tube package is used to package the power management. Please find attached 1 functions for your reference in this IC power. This power managment ic consists of 1 channels, each of which can be used independently. The purpose of this IC power is to provide you with a reference of 8-DIP (0.300, 7.62mm) functions. There are a lot of similarities between this IC power and other Battery Backup Circuit products. During the reflow process, a peak temperature of 260 is specified for the package. IC management conducts in a 4.5V-voltage supply. Power ics operate at 1 supply voltages. By Through Hole, IC management has been mounted. Power Management Circuits is a subcategory of this PMIC chip. The total number of pins on this power management is 8. 8 pins make up the power management. I should note that the minimum supply voltage (Vsup) for this IC management should be at least 0V, which is the minimum supply voltage that should be applied. The maximum supply voltage (Vsup) in this PMIC should not exceed 5.5V volts. Power management' mounting is recommended to be done with the Through Hole type of mounting. The temperature of the supervisors should be set to this range: 0°C~70°C TA. The power management's supply current is 11μA. A similar IC managements number of the manufacturer can always be found by using MAX819, the base power ics number. It requires 5V watts of power to operate this voltage supervisor.

MAX819MCPA+ Features

Battery Backup Circuit type
Minimum supply voltage of 0V
11μA operating supply current

MAX819MCPA+ Applications

There are a lot of Maxim Integrated MAX819MCPA+ Voltage Supervisors applications.

• Automotive permanent magnet synchronous motors
• Detection of phase imbalance
• Medical-specific insulation monitor
• Display equipment
• Detection of phase sequence
• Precision measurement
• Smartphones
• DC stabilized power supply module
• Efficient information transmission
• DVR