MAX820TCPE+ Overview

As you can see, this power management is mounted through 16 terminals. It is packaged with Tube. To assist you, this IC power includes 1 functions. On this supervisor, there is a series of 1 channels that can be found. The purpose of this IC power is to provide you with a reference of 16-DIP (0.300, 7.62mm) functions. It is a IC power that shares many benefits with other products from the Simple Reset/Power-On Reset line. As specified in the package specification, the peak reflow temperature of the package is set at 260. A supply voltage of 5V is used to conduct the PMIC chip. When 1 is applied to the power ic, it conducts. Using Through Hole, IC management is mounted. As a subcategory, this PMIC chip can be categorized as Power Management Circuits. There are a total of 16 pins on power management. There are 16 pins on the power managment ic. IC management can only work with a supply voltage of 2.75V volts. The supply voltage (Vsup) should not exceed 5.5V volts in this IC power. The recommended mounting type is Through Hole. The temperature of the supervisors should be set to this range: 0°C~70°C TA. During operation, this power management system outputs Push-Pull, Push-Pull. The power management's supply current is 150μA. For similar manage ics search of the manufacturer, you can always refer to MAX820, the base PMIC number. To be able to work, this power management requires 3/5V volts of power. At most, voltage supervisor can operate at a supply temperature of 150μA.

MAX820TCPE+ Features

Simple Reset/Power-On Reset type
Minimum supply voltage of 2.75V
150μA operating supply current

MAX820TCPE+ Applications

There are a lot of Maxim Integrated MAX820TCPE+ Voltage Supervisors applications.

• Household appliances
• Detection of phase sequence
• Radio
• Utility meter
• Analog circuit
• Set top box
• Electric heating appliances
• Telecommunications equipment
• Battery cars
• Insulation fault location system