MAX8211EPA+ Overview

It is mounted through 8 terminals on the power management. It is packaged with Tube. In this IC power you will find 1 functions for you to refer to. A series of 1 channels can be found on this supervisor. To assist you, this PMIC includes 8-DIP (0.300, 7.62mm) functions. There are a number of benefits that this PMIC has in common with other Simple Reset/Power-On Reset manage ics. Specifies a reflow peak temperature of 260 for the package during reflow. When 5V is applied to the power ic, it conducts. IC management is possible to find a succession of 1 voltages that have been checked. By DIP, Through Hole, IC management has been mounted. The power management system can be categorized as a Power Management Circuits chip. There are a total of 8 pins on power management. There are 8 pins on the power managment ic. It is recommended that Vsup should not be less than 2V for this IC power. In this PMIC, the maximum supply voltage (Vsup) should not exceed 16.5V volts. The mounting type of the supervisors is Through HoleYou should set the supervisor's temperature during -40°C~85°C TA . Power management has an output of Open Drain or Open Collector during operation. There is a 15μA supply current present in the power management. For similar manage ics search of the manufacturer, you can always refer to MAX8211, the base PMIC number. This power management requires 5V power to work. If you want to work with PMIC chip, you will need to supply PMIC chip with a temperature at least of 15μA.

MAX8211EPA+ Features

Simple Reset/Power-On Reset type
Minimum supply voltage of 2V
15μA operating supply current

MAX8211EPA+ Applications

There are a lot of Maxim Integrated MAX8211EPA+ Voltage Supervisors applications.

• Low voltage/high power - AI, GPU
• Automotive power systems
• Power communication system
• Power distribution systems of CCU
• Refrigeration
• Microprocessor system
• DSP
• External alarm
• Embedded computing
• Computer applications