MAX834EUK+T Overview

There are 5 terminals on this power management that allow it to be mounted. It is packaged with Tape & Reel (TR). In this PMIC, you can find 1 functions for your reference. Depending on the power managment ic you are looking at, you can find a total of 1 channels. Please refer to power management for SC-74A, SOT-753 functions. This IC power shares lots of benefits with other Simple Reset/Power-On Reset products. In order to ensure a good reflow performance, the package peak reflow temperature must be set at 260. Manage ics operate at 3.6V supply voltages. Power management conducts at a voltage of 1. Surface Mount mounts power management on the wall. It is possible to subcategorize this power ic as a Power Management Circuits chip. The total number of pins on this power management is 5. There are 5 pins on the supervisor. IC management can only work with a supply voltage of 2.5V volts. Voltage (Vsup) shouldn't exceed 11V volts in this PMIC. Surface Mount is the recommended mounting type. It is recommended that the supervisor be set to this temperature: -40°C~85°C TA. The output voltage of this power managment ic during operation is Open Drain or Open Collector. For this power management, there is an 5μA volt supply current. To find similar IC managements from the manufacturer, you can always search by MAX834. The maximum supply temperature is 5μA.

MAX834EUK+T Features

Simple Reset/Power-On Reset type
Minimum supply voltage of 2.5V
5μA operating supply current

MAX834EUK+T Applications

There are a lot of Maxim Integrated MAX834EUK+T Voltage Supervisors applications.

• Battery cars
• Electric heating appliances
• Detection of phase imbalance
• Magnetic resonance imaging
• Electronics installed in the vehicle
• Satellite navigation
• Consumer electronics
• WiFi router
• Important electronics for automotive protection
• Precision measurement