MAX8597ETP+ Overview

As a result of 20-WFQFN Exposed Pad compact design, the switching controller is compatible with most applications. 1 outputs are supported by the dc motor controller. An enclosure of Tube is used to package the PMIC. The system can process Transistor Driver dc switching's outputs (s). 4.5V~28V is the supply voltage and the operating voltage of the dc control. Workable in an dc switcher where -40°C~85°C TA is the -40°C~85°C TArm. The switching controller is capable of switching at the 200kHz~1.4MHz position. dc dc regulator can be generalized using Surface Mount. Switching control is made easier with the dcdc regulator's Current Limit, Enable, Frequency Control, Soft Start. Connected to a SWITCHING CONTROLLER analog IC, the switch converters are connected to a power supply. switching converters terminal (s) are designed to be at QUAD. There are many different types of terminations for 20. Some of the control techniques used by these dc dc converter ics are PULSE WIDTH MODULATION. It is inputted with a DC switcher's voltage of 5V. A search for "MAX8597" will reveal other relevant dc to dc converter ics. 20 pins are present on switching converter. The type is a particular Switching Regulator or Controllers of switching converter. Input voltage of dc dc voltage regulator must be 4.5V. Statistically, the DC regulator outputs 28V voltage. It's important to remember that the dc dc regulator's normaloutput current is 20A, so you should note it down when starting a new project. The maximum duty cycle of this voltage regulator dc to dc is set to 99.5 % to ensure reliability during power-up and power-down. As DC switcher has a Surface Mount, it's suitable for most applications and prototype designs. DC regulators have a maximum frequency of 1.4MHz. A circuit should contain 28V in order to ensure the voltage regulator dc to dc runs safely and reliably. The supply current of the voltage controller is 5mA. This the controllers dc receives a 3.4A nominal current supply.

MAX8597ETP+ Features

Transistor Driver Outputs
Switching Frequency: 200kHz~1.4MHz
Current Limit, Enable, Frequency Control, Soft Start
PULSE WIDTH MODULATION
Max Duty Cycle: 99.5 %

MAX8597ETP+ Applications

There are a lot of Maxim Integrated
MAX8597ETP+ DC to DC converter applications.

• Automation technology
• CMM
• Various precision measuring instruments
• Various precision measuring detectors
• Flaw detection equipment
• Balance equipment
• Industrial robots
• Industrial controllers
• Die casting equipment
• Injection molding machinery