MAX8608ZETD+T Overview

There is also a 14-WFDFN Exposed Pad package that is used to save space on the board. These LED drivers have 2 outputs.Surface Mount is used to mount the led light driver.It is highly reliable and high-performing when it emerges as a DC DC Regulator.-40°C~85°C TA is a valid operating temperature for the led driver.Taking advantage of Backlight has considerable benefits.The system operates at a frequency of 1MHz.In this case, it operates with terminations of 0.It is possible for undetermined failures to occur if the voltage supply is lower than 2.7V.There is a base part number MAX8608 for this LED driver.A voltage output of 26V is provided by this device.It is equipped with 14 pin count.It is designed to provide a supply voltage of 6V at its maximum.When the device is operated, 3V volts are applied to the circuit.By keeping the input voltage below 6V, high stability can be achieved.It should not exceed 0.9A in terms of output current.

MAX8608ZETD+T Features

Available in the 14-WFDFN Exposed Pad package
Operating temperature of -40°C~85°C TA
Frequency of 1MHz

MAX8608ZETD+T Applications

There are a lot of Maxim Integrated MAX8608ZETD+T LED Driver ICs applications.

• Scanners and Handy Terminals
• Down lighting
• General lighting
• A- lamps
• Stage Lighting and Signage
• LED backlight driver for LCD displays for portable equipment
• Replacement lamps
• High-end retail lighting
• Gallery lighting
• Panel lighting