Step-Down (Buck) Synchronous (2), Linear (LDO) (2)
Min Input Voltage
2.8V
Control Mode
VOLTAGE-MODE
Frequency - Switching
1.5MHz
Max Input Voltage
5.5V
Control Technique
PULSE WIDTH MODULATION
Voltage - Output 3
3.3V
w/Sequencer
No
Voltage/Current - Output 1
1.3V 600mA
Voltage/Current - Output 2
1.3V 1.2A
Voltage/Current - Output 3
3.3V 300mA
Height Seated (Max)
0.8mm
Length
3mm
Width
3mm
RoHS Status
ROHS3 Compliant
MAX8667ETEJS+T Product Details
MAX8667ETEJS+T Overview
In order to make voltage regulators' voltage regulators' transportation easier, it is packaged in 16-WFQFN Exposed Pad.Shipped in a Tape & Reel (TR) package.In total, voltage regulator supports 4 outputs on the same platform.To avoid malfunctioning of the voltage regulator, the operating temperature should be set to -40°C~85°C.Find more pin-to-pin solutions for your special needs by searching MAX8667.In the switching regulator, you can find 16 terminals that are connected to the board.The pinout of a switching regulator starts from pin 16.During relow soldering, temperature should peak 260.16-shaped pins are used in this voltage regulator.In addition to its 3.3V output voltage, it can be used for a wide range of applications.The input voltage required for this regulator is voltage ≥ 2.8V.Voltage regulators like this can use a voltage as high as 5.5V.There should be a 1.2A output from the DC DC Switching Regulator at the moment.Maximum current 1.2A will be produced by it.The voltage regulator DC to DC, as well as other Switching Regulator or Controllers products, play an important role in the industry as a whole.Surface Mount-axis for mounting to PCBs and other boards.