MAX8805XEWECC+T Overview

Currently, it supports a total of 1 outputs. The rectifier regulator is packaged in 16-UFBGA, WLCSP to facilitate transportation. Currently, the power regulator is available for shipping in Tape & Reel (TR) packages. In general, this voltage controller outputs a voltage of 0.4V~5.5V. For easy adaptability, there is a universal mount Surface Mount. The shunt regulator is intended for use in applications such as Converter, WCDMA PA Power and others. It is recommended that the operating temperature be set to -40°C~85°C in order to prevent malfunctions. It is designed to run the input voltage at 2.7V~5.5V. You can find 16 terminals of the voltage regulator. Check out search MAX8805 for more pin-to-pin solutions. The PCB or other board can be mounted using the Surface Mount on it. A power supply regulator with 16pins is present. Other Switching Regulator or Controllers like the voltage controller play a important role in the industry. A normal operation requires a voltage of 5.5V. There should be a 600mA output from the external regulator at present. A voltage greater than 2.7Vis required for this rectifier regulator. It is possible to switch the voltage controller at a frequency of 2MHz. At its maximum output, voltage regulator produces current 650mA.

MAX8805XEWECC+T Features

Widely used in Converter, WCDMA PA Power applications
Supply voltage: 5.5V

MAX8805XEWECC+T Applications

There are a lot of Maxim Integrated MAX8805XEWECC+T Specialized Voltage Regulators applications.

• TFT Active-Matrix LCD Displays
• Chipset/RAM Supplies as Low as 0.5 V
• PHS Phones
• Notebooks
• Active Bus Termination
• Broadband, Networking and Optical
• DAC Controlled High Current Output Stage
• Mobile Radios
• LCD Monitors
• Graphics Cards